Mộc Tiếng Việt Sign in
Mộc in English

Christmas Ornament Laser Cut Files: Name & Layered (SVG)

Christmas ornament laser cut files: name ornaments for 200 surnames, milestones, woodland animals, paint-your-own layers, tags, free files. SVG, DXF, PDF.

Updated

Posted 13 Nov 2026 · By the MocMakes team

Christmas ornament laser cut files, all in one place: family name ornaments for 200 surnames, milestone ornaments dated 2026 and 2027, woodland animals with a blank name plate, a 30-bauble set, layered ornaments to paint, a standing tree to hang them on, and stocking and gift tags. Most are one flat layer for 3 mm plywood, MDF or basswood, nothing to put together; the ornament tree and the ornament lanterns slot together and come as a 3.0 mm set and a 3.2 mm (1/8 in) set in one download. Every set is SVG, DXF (R2010, millimetres) and vector PDF at true size, with red cut and black engrave layers, and opens in most laser software (Glowforge, xTool, LightBurn). The pictures on this page are renders of the cut files, not photos.

Looking for a free file first? The next section has 7 free name ornaments and a free snowflake ornament, no email needed. Want every Christmas file we make? The Christmas 2026 Everything Bundle is 15 file sets for $14.99 USD, including the name ornaments, name tags, layered ornaments and ornament tree from this page.

Which ornament file should I pick?

You wantFileSheetPrice
The family surname, ready to cutFamily name ornaments, 200 surnames × 3 frames3 mm flat; also 3.2 or 6 mm$2.44 USD
"Our First Christmas", "New Home", a dated year2026 milestone ornaments, 15 designs + 2027 set3 mm flat; also 3.2 or 6 mm$2.44 USD
An animal with a child's nameWoodland animal name ornaments, 8 designs3 mm flat; also 3.2 mm or thinner$2.09 USD
A batch of baubles with a name plateChristmas ornaments, 30 files3 mm$3.49 USD
Something for the kids to paintPaint-your-own layered ornaments, 8 designs × 3 layers3 mm; 2.5 to 4 mm works$4.89 USD
A tree to display them onStanding ornament tree, 4 sizes3.0 and 3.2 mm sets, slot-together$2.49 USD
Lanterns with an ornament themeChristmas ornament lanterns 3-pack3.0 and 3.2 mm sets, slot-together$3.49 USD
Tags for stockings and giftsStocking and gift name tags, 12 designs × 2 sizes3 or 3.2 mm flat; also 1.5 to 2 mm$2.09 USD

All of them are SVG, DXF and PDF. The "Buy" link for each set is under its heading below and on the shop page; the 30% holiday prices run until 1 December 2026. Checkout is by card via Polar, the download is instant, and every file has a 14-day fix-or-refund promise. The files are checked in software against laser-cutting rules, not test-cut on every machine: try your settings on scrap, and never leave a laser unattended.

Free Christmas ornament laser cut files (no email needed)

Seven free Christmas name ornaments are on the free Christmas name ornament files page: a classic bauble (90 × 102 mm), the same bauble with 2026 on a plinth, a holly wreath (95 × 107 mm), a snowy tag (110 × 78 mm, the roomiest frame for longer names), a stocking and gift tag (up to 90 mm wide), a round snowfall ornament with the year engraved (86 × 98 mm) and a Christmas star (104 × 112 mm). Each has a script name welded to the frame, so it cuts as a single piece with a ribbon hole, and comes as a blank template plus 2 to 3 finished sample names. SVG, DXF and PDF at real size, for 3 mm plywood, MDF or acrylic. One click, no email.

The free Christmas laser cut files page adds a free snowflake filigree bauble, 88 × 99.5 mm, with a blank name band and a 4 mm hanging hole: one design from the 30-ornament set below, given away whole.

Licence for the free files: free for personal use and for selling the ornaments you cut. Just don't resell or share the files themselves. Like them? The paid sets below add 200 surnames ready to cut, 15 milestone designs, 8 animals, 30 baubles and 12 tags.

Personalized name ornaments: 200 surnames × 3 frames

Render of a laser cut family name ornament reading The Millers 2026, cut from 3 mm sheet
Family name ornaments, Round frame. A render of the files.

The 200 most common US surnames (from the U.S. Census Bureau's surname table) in three frames: Round ("The Smiths" with ★ 2026 ★), House ("The Smiths", Christmas 2026) and Banner ("The Smith Family", 2026), with the plurals done right (the Joneses, the Kennedys, no apostrophe). 600 finished files with the words already turned into engrave shapes, so no font is needed, plus blank frames, frames with editable text, the fonts (SIL Open Font License) and the surname list. Sizes with the hanging tab: Round 88 × 99.5 mm, House 87.4 × 86.5 mm, Banner 101.4 × 91 mm. One flat layer for 3 mm; also 3.2 mm (1/8 in), 6 mm, acrylic or leather. Buy the family name ornaments — $2.44 USD · 30% off until 1 Dec (was $3.49).

2026 and 2027 milestone ornaments (15 designs)

Render of a laser cut Our First Christmas 2026 ornament with a blank name line
2026 milestone ornaments. A render of the files.

Fifteen milestone ornaments dated 2026, each with a blank engraved name line: Our First Christmas, Just Married (Mr & Mrs), Just Engaged, New Home, Baby's First Christmas, First Christmas as Grandparents, My First Christmas (pet), Our New Puppy, Family of 3, Family of 4, Officially Retired, Proud Graduate, Merry Christmas, My Year in Review and a number-shaped 2026. The same 15 dated 2027 are included, plus Happy New Year 2027 and the number shape for 2028, 2029 and 2030. Round designs 85 × 95 mm (3.3 × 3.7 in), the number shape 90 × 58 mm. One flat layer for 3 mm; also 3.2 mm, 6 mm, acrylic or leather. Buy the milestone ornaments — $2.44 USD · 30% off until 1 Dec (was $3.49).

Woodland animal name ornaments (8 designs)

Render of eight laser cut woodland animal ornaments, each with a blank name plate
Woodland animal name ornaments. A render of the files.

Winter fox, moonlit owl, mountain bear, leaping hare, cardinal on holly, penguin and chick, moose and moon, doe and fawn, each with a blank name plate. 88 × 101.3 mm including the hanging tab, name area 56.4 × 11.4 mm, 4 mm hanging hole. One flat layer, no slots: 3 mm plywood or MDF, also 3.2 mm (1/8 in), acrylic and thinner sheet. Buy the woodland name ornaments — $2.09 USD · 30% off until 1 Dec (was $2.99).

Christmas ornaments: 30 files in one set

Render of 30 laser cut Christmas bauble ornaments in wood with name plates
The 30-ornament set. A render of the files.

Round baubles (woodland animals, toy soldiers, village scenes, snowflakes, lace filigree) and 7 shaped ornaments, each with a blank plate for engraving a name. Round baubles are 88 × 99.5 mm including the hanging tab, for 3 mm (1/8 in) plywood, MDF or acrylic; colour-coded cut, score and engrave layers. The free snowflake bauble above is one of the 30. Buy the 30-ornament set — $3.49 USD · 30% off until 1 Dec (was $4.99).

Paint-your-own layered ornaments (8 designs)

Render of eight painted three-layer laser cut Christmas ornaments: gnome, reindeer, snowman, Santa, nutcracker, tree, cottage and star
Paint-your-own layered ornaments. A render of the files.

Gnome, reindeer, snowman, Santa, nutcracker, Christmas tree, gingerbread cottage and a star with a name disc, each in 3 layers: a backer with a 4 mm hanging hole, the large colour shapes, and the details on top. Every colour area is its own piece, so each one can be painted before the layers are glued. Sizes from 75 × 71 mm (star) to 93 × 63 mm (tree); 82 pieces on 3 sheets of 300 × 300 mm (12 × 12 in), with piece numbers engraved on the back and a piece-number map. Drawn for 3 mm (1/8 in) plywood or MDF; with no slots or tabs, 2.5 to 4 mm works. A colouring page of all 8 outlines is included; paint is not. Buy the layered ornaments — $4.89 USD · 30% off until 1 Dec (was $6.99).

Standing ornament tree (4 sizes) and ornament lanterns 3-pack

Render of a laser cut standing ornament tree with baubles hanging from its hooks
Standing ornament tree. A render of the files.

Standing ornament tree: two cross-slotted plates on a round base, with J-notch hooks along the branches. Four sizes (W × D × H): Small 180 × 153 × 207 mm, 10 hooks; Medium 256 × 222 × 309 mm, 14 hooks; Large 284 × 255 × 391 mm, 18 hooks; and a Flat tree on a T-foot, 192 × 160 × 249 mm, 8 hooks; for ornaments up to 40 mm (Small, Flat) or 50 mm (Medium, Large). Every cut sheet fits a 400 × 300 mm (15.7 × 11.8 in) bed. Two complete sets for 3.0 mm and 3.2 mm (1/8 in) sheet, slots at sheet thickness + 0.10 mm. Ornaments are not included. Drawn by code and checked in software; not test-cut. Buy the ornament tree — $2.49 USD.

Render of the Christmas ornament lanterns 3-pack: a Christmas tree, hanging baubles and candy canes on square lanterns
Christmas ornament lanterns 3-pack. A render of the files.

Christmas ornament lanterns 3-pack: a Christmas tree lantern, a hanging baubles lantern and a candy cane lantern, all square, 98 × 98 × 126 mm assembled, each on one sheet of at most 361 × 260 mm (14.2 × 10.2 in). Two complete sets for 3.0 mm and 3.2 mm sheet. For battery LED tealights only, never a real candle. Buy the ornament lanterns 3-pack — $3.49 USD · 30% off until 1 Dec (was $4.99). These three are also part of the 21-design lantern set; every tealight lantern and tealight house we make is on the Christmas lantern laser cut files page.

Christmas stocking and gift name tags (12 designs)

Render of twelve laser cut Christmas name tags with names engraved on the name plates
Stocking and gift name tags. A render of the files.

Gingerbread boy, gingerbread girl, reindeer, Christmas tree, bauble, star, stocking, gingerbread house, snowflake, bell, gift box and snowman, each with a blank name plate. Two sizes of every tag: Large fits 75 × 100 mm (about 3 × 4 in), Small fits 60 × 80 mm (about 2.4 × 3.1 in). One flat layer, no slots: 3 mm or 3.2 mm (1/8 in) plywood, MDF or acrylic, and thinner sheet, leather or card. Buy the name tags — $2.09 USD · 30% off until 1 Dec (was $2.99).

Sheet thickness, formats and sizes

Every paid set is SVG, DXF (R2010, millimetres) and vector PDF at true size: red lines cut, black fills engrave, blue lines score where a design has them; the free files use the same colours. Most round ornaments are 85 to 90 mm across and 95 to 102 mm tall with the hanging tab; exact sizes are under each heading above. Measure your sheet with calipers first: "3 mm" plywood often measures 2.7 to 3.2 mm. For the flat ornaments and tags that only changes the look of the edge. The ornament tree and the lanterns slot together, so pick the 3.0 mm or the 3.2 mm set that matches your sheet; if a joint is still loose or tight, read laser kerf test and slot width or run the file through the Slot Fit Adjuster.

Christmas ornament laser cut files: questions

What thickness of plywood do ornament files need?

All the sets are drawn for 3 mm plywood or MDF. The flat ornaments and tags have no slots, so 3.2 mm (1/8 in) also works; the family name and milestone ornaments also cut from 6 mm, the tags from 1.5 to 2 mm, the layered ornaments from 2.5 to 4 mm. The ornament tree and the ornament lanterns slot together, so each download has a 3.0 mm set and a 3.2 mm set.

Which file formats are included, and which one should I open?

SVG, DXF (R2010, millimetres) and vector PDF in every set, all at true size. Open the SVG in most laser software, the DXF in CAD-style software; the PDF is the fallback. More in SVG, DXF or PDF for laser cutting.

Can I sell the ornaments I cut from these files?

Yes. Cut the designs as often as you like and sell or gift the physical pieces you make, in a small business. Sharing, reselling or uploading the digital files is not allowed.

How do I change the name on a name ornament? Do I need a font?

For the 200 surnames in the family name set, no: the words are already engrave shapes. For another surname, open one of the frames with editable text and type it; the fonts are in the download under the SIL Open Font License. The woodland animals, tags, milestone ornaments and the 30-ornament set have a blank name plate: type the name in your laser software and engrave it. The free name ornaments come with a blank template to type and weld your own name.

How big are the ornaments, and can I resize them?

Most round ornaments are about 85 to 90 mm across and 95 to 102 mm tall with the hanging tab. The flat ornaments and tags can be scaled, since nothing has to fit a slot. The ornament tree and the lanterns should not be: their slots are drawn for 3.0 or 3.2 mm sheet, and scaling changes the slot width. Use the Slot Fit Adjuster instead.

Will the files cut on a lower-power diode laser?

The files are plain vector cut lines and engrave fills at true size, so the only question is whether your machine cuts through your sheet. If it cuts 3 mm plywood, it cuts these. On a lower-power machine, start with the flat name ornaments and tags; the tags are also drawn for 1.5 to 2 mm sheet. Try your settings on scrap first.

Are the pictures photos of cut ornaments?

No. They are renders made from the cut files.

Do the free files have the same licence as the paid ones?

Yes, in substance. The free files are for personal use and for selling the ornaments you cut; the paid files are for cutting and selling the pieces in a small business. In both cases, resharing or reselling the files themselves is not allowed.

Cards on the table

Mộc earns money in public, so anything that could colour what Mộc says is public too.

  • Chưn Nê works at Sidcorp, the company that makes DodgePrint and ePOD (the platform behind the showroom).

  • Mộc uses DodgePrint on a free licence. Everyone else pays.

  • DodgePrint links on this site are affiliate links: you get 10% off, Mộc earns 25% recurring. Details on Tools & disclosures.