Mộc Tiếng Việt Sign in
Mộc in English

Christmas Lantern Laser Cut Files: Tealight Holders (SVG)

Christmas lantern laser cut files: tealight lanterns, nativity, snowflake and woodland 3-packs, tealight houses. SVG, DXF, PDF for 3.0 and 3.2 mm sheet.

Updated

Posted 11 Nov 2026 · By the MocMakes team

Christmas lantern laser cut files, all in one place: tealight lanterns and tealight houses you cut from 3.0 mm or 3.2 mm (1/8 in) sheet and slot together, so a small LED tealight glows through snowflakes, a nativity, a sleigh or a gingerbread house. Every set comes as SVG and DXF (most also as PDF), drawn at true size in millimetres, with a 3.0 mm set and a 3.2 mm set in the same download. The files open in most laser software (Glowforge, xTool, LightBurn). The pictures on this page are renders of the cut files, not photos.

Looking for a free file first? The free Christmas laser cut files page has the Christmas Tree Lantern from our ornament 3-pack, whole, with a 3.0 mm and a 3.2 mm set, plus a slot-together village house and a slot fit test bar, no email needed. Want every Christmas file we make? See the Christmas 2026 Everything Bundle.

Which lantern file should I pick?

  • One big set: Christmas lanterns, 21 designs (SVG, DXF).
  • A themed 3-pack: nativity, snowflakes, winter woodland, Christmas ornaments, or sleigh and snowman (SVG, DXF, PDF).
  • Tealight houses: four houses in one set, or the gingerbread house on its own.
  • Single lanterns: the nativity lantern or the gingerbread house lantern.

Every lantern is for LED tealights only: wood and a real flame do not mix. Prices are next to each "Buy" link below and on the shop page; the 30% holiday prices run until 1 December 2026. Checkout is by card via Polar, the download is instant, and every file has a 14-day fix-or-refund promise.

Checked in software, not test-cut yet. Never leave a laser unattended.

After hanging ornaments rather than lanterns? Every Christmas ornament laser cut file we make, paid and free, is on one page: name ornaments for 200 surnames, milestone, woodland and layered ornaments, tags and a standing ornament tree.

Christmas lanterns: 21 designs

Sizes: square lanterns 98 × 98 × 126 mm (3.9 × 3.9 × 5.0 in) assembled, 6 parts (4 walls, base, top frame); hexagon lanterns 134 mm across the corners and 131 mm tall (5.3 × 5.2 in); tealight houses 86 × 106 × 109 mm (3.4 × 4.2 × 4.3 in) assembled, 7 parts (two gable walls, two side walls, two roof panels, base); tealight scenes 176 × 78 × 115 mm (6.9 × 3.1 × 4.5 in), 3 parts (front screen, back screen, base). One design per file, all parts on one sheet of at most 374 × 270 mm (14.7 × 10.6 in); the parts slot together.

Render of the 21 Christmas tealight lantern designs, laser cut from 3 mm sheet
21 tealight lanterns in two sets. A render of the files.

21 tealight lanterns in two sets, for 3.0 mm and 3.2 mm sheet. Largest pieces: up to 176 × 78 × 115 mm (the tealight scenes); cut sheets up to 374 × 270 mm. SVG and DXF. Buy the 21-lantern set — $4.19 USD · 30% off until 1 Dec (was $5.99).

Nativity lantern laser cut files

Sizes: the two square lanterns are 98 × 98 × 126 mm (3.9 × 3.9 × 5.0 in) assembled, 6 parts (4 walls, base, top frame); the tealight scene is 176 × 78 × 115 mm (6.9 × 3.1 × 4.5 in), 3 parts (front screen, back screen, base). The single Nativity Lantern is the same square size.

Render of the nativity lanterns 3-pack: a nativity lantern, an angel lantern and a nativity tealight scene
Nativity lanterns 3-pack. A render of the files.

Nativity lanterns 3-pack: a nativity lantern, an angel lantern and a nativity tealight scene, for 3.0 mm and 3.2 mm sheet. Up to 176 × 78 × 115 mm (tealight scene); sheets up to 361 × 260 mm. SVG, DXF, PDF. Buy the nativity 3-pack — $2.99 USD.

Nativity lantern, single: a slot-together box with the Holy Family under the star on the front, 98 × 98 × 126 mm, one 361 × 259 mm sheet. SVG, DXF. Buy the nativity lantern — $1.74 USD · 30% off until 1 Dec (was $2.49). For a full light-up nativity scene with figures, see the nativity scene laser cut file.

Snowflake lanterns

Sizes: the square lantern is 98 × 98 × 126 mm (3.9 × 3.9 × 5.0 in) assembled, 6 parts (4 walls, base, top frame); the two hexagon lanterns are 134 mm across the corners and 131 mm tall (5.3 × 5.2 in).

Render of the snowflake lanterns 3-pack: a square lantern and two hexagon lanterns with snowflakes and stars
Snowflake lanterns 3-pack. A render of the files.

A square snowflake lantern and two hexagon lanterns with snowflakes and stars. Up to 134 mm across and 131 mm tall (hexagon lanterns); sheets up to 374 × 270 mm. SVG, DXF, PDF. Buy the snowflake 3-pack — $3.49 USD · 30% off until 1 Dec (was $4.99).

Winter woodland lanterns

Sizes: all three are square lanterns, 98 × 98 × 126 mm (3.9 × 3.9 × 5.0 in) assembled, 6 parts (4 walls, base, top frame).

Render of the winter woodland lanterns 3-pack: a snowy village, a winter forest and reindeer among pines on square lanterns
Winter woodland lanterns 3-pack. A render of the files.

A snowy village, a winter forest and reindeer among the pines, on three square lanterns, each 98 × 98 × 126 mm; sheets up to 361 × 260 mm. SVG, DXF, PDF. Buy the woodland 3-pack — $3.49 USD · 30% off until 1 Dec (was $4.99).

Christmas ornament lanterns

Sizes: all three are square lanterns, 98 × 98 × 126 mm (3.9 × 3.9 × 5.0 in) assembled, 6 parts (4 walls, base, top frame).

The Christmas Tree Lantern of this 3-pack is free, whole, on the free files page; the baubles and candy cane lanterns are in the paid pack.

Render of the Christmas ornament lanterns 3-pack: a Christmas tree, hanging baubles and candy canes on square lanterns
Christmas ornament lanterns 3-pack. A render of the files.

A Christmas tree, hanging baubles and candy canes, on three square lanterns, each 98 × 98 × 126 mm; sheets up to 361 × 260 mm. SVG, DXF, PDF. Buy the ornament 3-pack — $3.49 USD · 30% off until 1 Dec (was $4.99). The ornaments to hang beside them are on the Christmas ornament laser cut files page.

Sleigh and snowman lanterns

Sizes: the tealight scene is 176 × 78 × 115 mm (6.9 × 3.1 × 4.5 in), 3 parts (front screen, back screen, base); the two square lanterns are 98 × 98 × 126 mm (3.9 × 3.9 × 5.0 in) assembled, 6 parts (4 walls, base, top frame).

Render of the sleigh and snowman lanterns 3-pack: a sleigh tealight scene, a snowman lantern and a starry night lantern
Sleigh and snowman lanterns 3-pack. A render of the files.

A sleigh tealight scene, a snowman lantern and a starry night lantern. Up to 176 × 78 × 115 mm (sleigh scene); sheets up to 361 × 260 mm. SVG, DXF, PDF. Buy the sleigh 3-pack — $3.49 USD · 30% off until 1 Dec (was $4.99).

Tealight houses and the gingerbread house lantern

Sizes: each house is about 86 × 106 × 109 mm (3.4 × 4.2 × 4.3 in) assembled, 7 parts (two gable walls, two side walls, two roof panels, base); all parts of one house fit on one sheet of 345 × 218 mm (13.6 × 8.6 in) in the 3 mm set.

Render of four tealight houses: Snowy Cottage, Little Chapel, Gingerbread House and Log Cabin
Four tealight houses. A render of the files.

4 tealight houses: Snowy Cottage, Little Chapel, Gingerbread House and Log Cabin, each about 86 × 106 × 109 mm with room for an LED tealight; one 345 × 218 mm sheet per house. SVG, DXF, PDF. Buy the 4 houses — $3.49 USD · 30% off until 1 Dec (was $4.99).

Render of the gingerbread house lantern with heart and candy windows
Gingerbread house lantern. A render of the files.

Gingerbread house lantern, single: a little house with heart and candy windows that glows over an LED tealight, 86 × 106 × 109 mm, one 345 × 218 mm sheet. SVG, DXF. Buy the gingerbread house lantern — $1.74 USD · 30% off until 1 Dec (was $2.49).

Bigger light-up pieces: the Christmas house laser cut file (a 27-part cottage with a 3D preview) and the winter village night light.

Christmas lantern laser cut files: questions

What sheet thickness do the lantern files need?

Each download has two sets: one drawn for 3.0 mm sheet and one for 3.2 mm (1/8 in). Measure your plywood with calipers first; "3 mm" sheets often measure 2.7 to 3.2 mm. If a joint is loose or tight, read laser kerf test and slot width or run the file through the Slot Fit Adjuster.

Which file formats are included?

SVG and DXF in every set; the 3-packs and the 4 tealight houses also include PDF. All are drawn at true size in millimetres. Which to open is explained in SVG, DXF or PDF for laser cutting.

Can I use a real candle?

No. The lanterns are drawn for LED tealights only.

Can I sell the lanterns I cut?

Yes, under the standard licence: sell the pieces you cut, any quantity, as a small business; sharing or reselling the files is not allowed.

Are the pictures photos of cut lanterns?

No. They are renders made from the cut files.

Cards on the table

Mộc earns money in public, so anything that could colour what Mộc says is public too.

  • Chưn Nê works at Sidcorp, the company that makes DodgePrint and ePOD (the platform behind the showroom).

  • Mộc uses DodgePrint on a free licence. Everyone else pays.

  • DodgePrint links on this site are affiliate links: you get 10% off, Mộc earns 25% recurring. Details on Tools & disclosures.