Snowy Lantern Street · light-up village scene, 10 pieces, 3 mm · SVG · DXF · PDF
Winter Village Night Light SVG: Snowy Lantern Street
A layered wooden night light you cut on your own laser: a snowy Christmas street at night, with a crescent moon and stars, a far village with a church steeple, a row of houses, two cottages, two lantern posts and a horse-drawn sleigh, framed by tall pine trees in an arch. The snow on the roofs and the street is cut right through, so it glows when the LED is on. This is a digital download; nothing is shipped.

$5.99 USD
Buy and downloadCard, Apple Pay or Google Pay · no account needed · instant download · 14-day fix or refund See the layer order- 150 × 192 mm (5.9 × 7.6 in), about 30 mm deep with 3 mm sheet and about 32 mm with 1/8 in (3.2 mm). Every piece fits a 300 × 200 mm or 12 × 8 in sheet.
- 10 pieces, back to front: back panel, two LED spacer rings, the sky, five scene layers and the front frame. They glue together in that order.
- Lit by a warm white LED strip (about 52 cm) or a slim LED puck light no thicker than 6 mm, in a 6 mm cavity with a wire notch. The light is not included.
- Checked in software: each piece is one connected part, every bridge at least 1.5 mm wide (narrowest 1.69 mm). Not test-cut yet.
File won't open or doesn't fit as described? Email [email protected] within 14 days and we fix it or refund you in full.
Largest piece: 150 × 192 mm (5.9 × 7.6 in); every piece is that size and fits a 300 × 200 mm or 12 × 8 in sheet. Sheet thickness: 3 mm plywood or MDF (1/8 in works too). True size, 1:1 mm. Licence (Standard): sell the pieces you cut, any quantity, as a small business; sharing or reselling the files is not allowed.
Not sure the files suit your laser? Cut a free file first
Pay by card, or with Apple Pay or Google Pay where your device supports it. No account needed. PayPal is not available. Checkout runs on Polar, which gives you the download right away; tax may be added for where you are. Getting your files
What is in the zip
10 SVG files, one per piece
Red hairline = cut, 1 unit = 1 mm. Import at 100 %: the back panel measures 150 × 192 mm.
DXF and PDF too
The same 10 pieces as DXF (R2010, millimetres, layer CUT) and as vector PDF, one piece per page at true size.
All pieces on 2 sheets
All 10 pieces laid out together as SVG, DXF and PDF, on 2 sheets of 630 × 402 mm (24.8 × 15.8 in) for large beds.
README and licence
The layer order, the LED and assembly notes in plain text, plus the licence. One zip, about 0.7 MB.
Size and sheet thickness
One size, cut at 1:1
The arch outline is the same on every piece, so the finished light is the size of one piece; only the depth depends on your sheet:
| Sheet | Finished (width × height) | Depth | Pieces to cut |
|---|---|---|---|
| 3 mm | 150 × 192 mm (5.9 × 7.6 in) | about 30 mm | 10 pieces, each fits 300 × 200 mm |
| 1/8 in (3.2 mm) | 150 × 192 mm (5.9 × 7.6 in) | about 32 mm | 10 pieces, each fits 12 × 8 in |
Do not scale the files. The layers only line up, and the LED cavity only fits, at the drawn size. After import, check that the back panel measures 150 × 192 mm (5.91 × 7.56 in).
Layer order, back to front
This is also the gluing order. The file names carry the same numbers.
- Back panel, solid. Paint the inner face white to reflect the light (optional).
- LED spacer ring, wire notch at the bottom.
- LED spacer ring, glued exactly on top of the first one.
- Sky: crescent moon, stars and the glow above the hills.
- Far village with its church steeple.
- Middle row of houses.
- The two near cottages.
- Lantern posts and the horse-drawn sleigh.
- Snowbank and small pine trees.
- Front frame: the tall pine trees and the ground.
Line up the outer edges of every layer with the back panel, and put a little glue on the frame border only, so none shows through the openings.
Questions before you cut
Has this night light been cut on a real laser?
Not yet. Every piece was checked in software: one connected piece each, no loose islands, every bridge and detail at least 1.5 mm wide (the narrowest is 1.69 mm). Cut one layer as a test first.
What light do I need?
A warm white LED strip, USB or battery, about 52 cm long, or a slim LED puck light no thicker than 6 mm. The two spacer rings make a 6 mm deep cavity: the strip goes around their inside wall with the LEDs facing inwards, and the wire leaves through the 8 mm notch at the bottom. The light is not included.
Can I use a candle or a bulb?
No. LED lights only, never a candle or a hot bulb.
Which machines and software does it work with?
Any laser software that imports SVG or DXF, on diode or CO2 lasers that cut 3 mm plywood or MDF. Every piece fits a 300 × 200 mm or 12 × 8 in sheet, so a small bed is enough.
How do I get the files?
Right after you pay: a download button appears on the page you see after paying, and a receipt email follows. You can download again any time from the customer portal with the email you bought with and a one-time code. More in Getting your files.
Licence
One licence comes with the files: Standard covers home use and selling the pieces you cut, in any quantity, in a small business. The full text comes in the zip (LICENSE.txt).
-
Standard licence
For makers, gift-givers and small craft businesses
- Cut the design for personal use, as many times as you like.
- Sell or give away the physical items you cut from it, in any quantity, in a small business: at markets, craft fairs, in your own shop or online.
- Resize it, add your own engraving or paint, and sell the physical results.
- Not allowed: reselling, sharing, uploading or giving away the digital files, alone or in another pack; selling the design as printed or digital artwork; claiming the design as your own.
$5.99 USD
Buy and download
Questions about the licence? Email [email protected] before you buy.
Good to know
-
The pictures are 3D renders made from the cut files, not photos of a cut night light.
-
Designed by MocMakes. The scene artwork was traced, cleaned and checked by code.
-
Checked in software, not test-cut yet. Never leave a laser unattended.
-
LED lights only. Never put a candle or a hot bulb in a wooden light.
-
MocMakes is our own shop: the Polar links are not affiliate links.
More from the shop
More Christmas files
Other laser cut files from MocMakes, each with SVG and DXF.



